Nuvite’s citrus-based CitriCut Gel wetwash uses it’s fluid viscosity to cling to vertical and overhead surfaces, and it provides increased wet-out time and penetration of stubborn dirt or caked grease. CitriCut Gel extends Nuvite’s extremely popular CitriCut formulation and its exceptional cleaning capabilities to even the most difficult situations. It also allows longer wet time for all surfaces even when used with water dilution. Water dilution may still be used if needed, or, for heavy cleanup, CitriCut Gel can be used at full concentrate strength by applying with a low pressure spray, let soak, and spray rinse clean with high pressure. All these capabilities come without worry of gelcoat/paint, acrylic or metal damage, and it is safe for users and the environment. It smells good, too!
For Normal Cleaning – Wet Wash:
Dilute 1:2-1:8 with water, depending upon soil conditions and cleaning frequency. Apply to surfaces by spray, mop or foam application. Agitate to loosen soil and rinse with water.
Vertical or overhead surfaces:
Spray full strength on surface with low pressure spray. Allow to soak – CitriCut Gel will cling and penetrate soil and grease. Agitate to loosen and spray rinse with high or low pressure water. Note: in the event of product contact on formed polycarbonates, thoroughly rinse with water.
Use full strength concentrate, viscosity can be adjusted with liquid CitriCut if desired. Allow to soak 15-20 minutes. Do not allow soaked area to completely dry. Rinse with high pressure water.
Can be used as a wet wash or a dry wash.
Heavy-duty cleaner and degreaser in gel form that clings to vertical and overhead surfaces.
Effective for cleaning dirt, carbon, grease and oils
Safe and pleasant for users and the environment
Increased wet time ability allows great penetration on caked grease
Will not deteriorate seals, hoses and rubber components
Carries all major certifications
Contains no alkaline salts, petroleum distillates or phosphates.