Nuvite NuGear SC
NuGear SC is a heavy-duty aqueous cleaning compound for aircraft engine and component degreasing operations. NuGear SC can be used for hand cleaning as well as in hot immersion tanks and spray cabinets. It has been specifically developed for superior wetting &, penetration for engine shop operations, provides safe and effective cleaning at economical cost while conforming to stringent water, air and environmental regulations.
Core Benefits. • Exceptional Cleaning Power Through Special Selection of Surfac-tants, Wetting and Emulsifying Agents • Economical Heavy Duty Cleaning • Safe to All Aircraft Components • Formulated for use in Hot Immersion Tanks & Spray Cab-inets • Contains No Alkaline Salts • Contains No Phosphates and is Completely Bio-degradable • Rinsing and not Affected By Hard Water • Replenishable Concentrate Formula for Ongoing Bulk Use • Conforms to Airframe OEM standards and specifi-cations to include engine OEM manufacturers: Pratt & Whitney, Rolls Royce and General Electric for engine overhaul operations.
AMS 1650 • ASTM 945 • Pratt & Whitney • Rolls Royce • General Electric.
• Exceptional Cleaning Power Through Special Selection of Surfactants, Wetting and Emulsifying Agents • Economical Heavy Duty Cleaning • Safe to All Air-craft Components • Formulated for use in Hot Immersion Tanks & Spray Cabi-nets • Contains No Alkaline Salts • Contains No Phosphates and is Completely Biodegradable • Rinsing and not Affected By Hard Water • Replenishable Con-centrate Formula for Ongoing Bulk Use • Conforms to Airframe OEM stand-ards and specifications.
Directions for use.
Always refer to appropriate OEM Overhaul Standard Practices Manual for specific procedures for the use of NuGear SC.
For Normal Cleaning Hand Cleaning Local Application: Dilute 1:4 – 1:10 with wa-ter, depending upon condition. Apply to surface in shallow wash tank, or by mop or spray. Loosen surface material with non-metallic bristle brush, reapplying Nu- Gear SC solution continuously. Agitate to loosen soil followed by water rinse. Reapply if necessary. Wipe dry with terry towel.
HeavyDuty Cleaning/Hot Immersion Tank/Spray Cabinet: Use concentrate or a 1:4 dilution depending upon manufacturers Standard Practices Manual requirements. Allow to soak at 140 to 170oF (60 – 77oC). Effective concentration can be main-tained with periodic addition of fresh NuGear SC.
For more information, visit the product web page HERE