The SLW Finishing Pad for BuffPro® Model JF180 Axial Polisher, is a synthetic lambs wool material over a foam pad that works with your mildest finishing compounds to provide unparalleled final finishing results. The compound stays where the work is being done so you can finish all of your work quickly and uniformly.

We recommend the BuffPro® SLW Finishing Pad for final metal polishing, glazing or as a one-step wax cleaner. This pad can also be used on stone, fully-cured primed or painted metal, soft body compounds, maintenance on gel coat, finishing work. The SLW Finishing pad brings metal to a high-gloss mirror like shine.

Designed for extended professional use, these pads easily wash out with soap and water and resist being saturated with compound.

Features:

• For use with the BuffPro® Model JF180 Polisher
• Heavy wool material over a foam backing
• For use on bare metal, fiberglass, plastic & plexi-glass, gel-coat, painted surfaces (for pre-finishing), stone and polished concrete
• Resists saturation with compound
• Easily washed out with soap and water

BuffPro Wool Pad Cleaning

Clean BuffPro Pads by hand using a mild detergent and warm water. Work the detergent into the pad using your fingers. Rinse pad thoroughly with warm water. Squeeze out as much water as possible by hand. Set pad on it’s end at room temperature and leave to dry overnight. Pads should be ready for use the following day. Do not spin dry wool pads using the BuffPro Buffer, doing so may cause damage and void its warranty.