The Polishing Wool Pad for BuffPro® Model JF180 Axial Polisher, is fine wool material over a foam pad that works with your milder polishing compounds to provide unparalleled polishing and finishing results. The compound stays where the work is being done so you can finish all of your work quickly and uniformly.
We recommend the BuffPro® Polishing Wool Pad with polishing compounds for light scratches, haze, minor imperfections, and oxidation removal on metal, gelcoat or painted surfaces. This pad can also be used on stone, fully-cured primed or painted metal, and soft body compounds. The Polishing Wool pad brings raw metal to a high-gloss finish.
Designed for extended professional use, these pads easily wash out with soap and water and resist being saturated with compound.
For use with the BuffPro® Model JF180 Polisher
Heavy wool material over a foam backing
Removes swirl marks left by high speed buffers or orbital polishers, scratches, heavy oxidation, paint or 1500 grit wet sanding
For use on bare metal, fiberglass, plastic & plexi-glass, gel-coat, painted surfaces (for pre-finishing), stone and polished concrete
Resists saturation with compound
Easily washed out with soap and water
BuffPro Wool Pad Cleaning
Clean BuffPro Pads by hand using a mild detergent and warm water. Work the detergent into the pad using your fingers. Rinse pad thoroughly with warm water. Squeeze out as much water as possible by hand. Set pad on it’s end at room temperature and leave to dry overnight. Pads should be ready for use the following day. Do not spin dry wool pads using the BuffPro Buffer, doing so may cause damage and void its warranty.