The Heavy Cut (HC) Wool Pad for the BuffPro® Model JF180 Polisher, is heavy wool material over a foam pad that works with your coarsest cutting compounds to provide unparalleled cutting power. The compound stays where the work is being done to help you finish all of your work quickly and uniformly.
We recommend the BuffPro® Heavy Cut (HC) Wool Pad for use with your heaviest compound to remove swirl marks left by high speed buffers or orbital polishers, scratches, heavy oxidation, paint or 1500 grit wet sanding. The pad can also be used on stone, raw metal, fiberglass, plastic & plexi-glass, gel coat repairs, pre-finishing prep work and polished concrete.
For use with the BuffPro® Model JF180 Polisher
Heavy wool material over a foam backing
Removes swirl marks left by high speed buffers or orbital polishers, scratches, heavy oxidation, paint or 1500 grit wet sanding
For use on bare metal, fiberglass, plastic & plexi-glass, gel-coat, painted surfaces (for pre-finishing), stone and polished concrete
Resists saturation with compound
Easily washed out with soap and water
BuffPro Wool Pad Cleaning
Clean BuffPro Pads by hand using a mild detergent and warm water. Work the detergent into the pad using your fingers. Rinse pad thoroughly with warm water. Squeeze out as much water as possible by hand. Set pad on it’s end at room temperature and leave to dry overnight. Pads should be ready for use the following day. Do not spin dry wool pads using the BuffPro Buffer, doing so may cause damage and void its warranty.