Products

briskheat

Features:

  • Single or dual zone
  • 8.4″ (213mm) touch-screen
  • Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
  • Universal voltage: 100-130VAC, 200-240VAC
  • 30 amps output per heat zone
  • 10 thermocouple sensors per zone
  • Accepts J-type thermocouples
  • Boeing and Airbus Approved
aircraft composite repair

Briskheat ACR Hot Bonders

Industry leading composite repair Hot Bonders, single or dual zone.
120 or 240 Volt
Boeing and Airbus Approved

EASY-TO-USE INTERFACE ON A FULL COLOUR HD TOUCH-SCREEN.

  • Quick 3-step programming: Stores up to 30 programs on hot bonder
  • Easy-to-follow menu choices
  • Quick and easy data entry: Uses simple drop-down menus and a familiar QWERTY keyboard interface
  • Secure: Multiple levels of password protection

Upgradeable

  • Multi-task: Perform several operations at once
  • Retains history of last 12 cures
  • Customized post cure analysis: Data logging intervals 1 to 99 minutes
  • Multiple language support: English, German, Russian, Chinese (Mandarin)

FAST AND SIMPLE DATA TRANSFER WITH USB DRIVE (USB FLASH DISK INCLUDED)

  • Transfer and archive post cure data history to your PC.
  • Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft ® Excel ® and Word ®
  • Transfer your programs quickly from one bonder to another
  • Update your hot bonder easily with the latest software version for FREE.

SPECIFICATIONS

GENERAL

  • Single or dual zone
  • 8.4″ (213mm) touch-screen with easy-to-use interface
  • USB port for data transfer (USB flash disk included)
  • Input ground fault interrupter breaker protected
  • Audible and visual alarms for high and low temperature / vacuum limits
  • Data logs digitally or through built-in printer : prints and records real-time status of cure including program parameters

POWER

  • Input Voltage: 100-130VAC, 200-240VAC
  • MAINS supply voltage fluctuations up to ±10% of the nominal voltage
  • Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
  • Frequency: 50-60Hz
  • 30 amps maximum per zone
  • Output cord receptacle: NEMA L15-30R

VACUUM

  • Dual vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
  • Pressure: 28in Hg (13.8PSI)
  • Ability to manually adjust pressure for each zone

TEMPERATURE CONTROL

  • Cure up to 1400 F (760 C)
  • 10 thermocouple sensor inputs per zone
  • Accepts J-type thermocouple connectors
  • Accuracy: ±3°F (1.67°C)
  • Monitors all thermocouples for alarms

© Copyright - Frasers Aerospace 2017