• Significantly reduces corrosion events in both structure & electrical systems
  • Easy to apply (aerosol cans/fogging technique provides 3000 sq.ft./gallon)
  • Ultra This Film promotes weight reduction, improving payload capacity
  • Non-toxic (no SCBA required) Low VOC and 50 state compliant, with pleasant odour
  • Will not interfere with NDT procedures

Lear Chemical ACF-50

ACF-50, Anti-Corrosion Formula, is a state-of-the-art, anti-corrosion lubricant compound, specifically designed for the Aerospace Industry. It is an ultra Thin Fluid Compound (TFFC) that actively treats metal using advanced polar bonding technology. ACF-50’s synthetic inhibitors and active chemistry penetrates through the oxide deposits to the base of the corrosion cell where it emulsifies,
encapsulates, and then lifts the electrolyte away from the metal surface. ACF-50 then allows this moisture to evaporate while providing an atmospheric barrier that prevents further moisture contact.
With the electrolyte removed the corrosion process is halted, ACF-50 actively penetrates and “creeps” into the tightest seams, lap joints, micro cracks, and around rivet heads, displacing moisture and other corrosive fluids (orange juice, coke, coffee, salt water) in these corrosion prone areas. ACF-50’s thin
film acts like an “Off Switch” for corrosion remaining effective for up to 24 months.

Directions for use:

  1. Spray or wipe on a uniform coat of ACF-50 directly to the area to be protected. Apply a heavier coat to areas where corrosion is present.
  2. Re-application of ACF-50 may be necessary after solvent cleaning, contact with certain chemicals (acid, etc.) or when metal surface has been severely damaged by abrasion.

Refer to MSDS for health & safety information. Contact Frasers Aerospace representatives for further information and assistance.

From $13.72 Excl. VAT



Note: For Safety Data Sheets in languages other than English, please click here to contact us.

© Copyright - Frasers Aerospace 2017